電話 02-2394-2890 Line request-quote

Reference Images with the Efficiency of Laser

The 12,000 lm PT-RZ12K 3-Chip DLP™ Series projectors combine class-leading imaging technologies with the practical advantages of Panasonic SOLID SHINE Laser: minimal picture quality degradation over long periods in continuous use, 20,000-hour maintenance-free operation*, flexible installation, failsafe reliability, and a wealth of powerful features for creative visual presentations in large spaces.

DLPSOLID SHINE LASERDEGITAL LINK3D PROFESSIONALGeo. Pro24/7 Oparation360°

PT-RZ12KLenses sold separately.

PT-RZ12K
12,000 lm WUXGA (1920 x 1200)
20,000:1 Geometric Adjustment

* At this time, brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Usage environment affects light-source lifespan. Panasonic recommends cleaning or checkup at point of purchase after approximately 20,000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.

SOLID SHINE Laser Technology

Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

Diagram for 3-Chip DLP™ Laser Projector

Precision Color Reproduction

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Lower Total Cost of Ownership

Projector delivers up to 20,000 hours*1 maintenance-free service at full power with no filters to clean or replace*2 thanks to a fully sealed optical block and redesigned air intake. Energy consumption has also been reduced.

*1 At this time the brightness will have decreased to approximately half of its original level. Please refer specification for detail condition.

*2 Usage environment may affect filter maintenance cycle.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dustproof Optics Extend Longevity

Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.

* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.

Efficient Cooling System Enhances Reliability

A liquid cooling system for the light source features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise*.

* Please refer to product specifications for more details.

Efficient Cooling System Enhances Reliability01
Efficient Cooling System Enhances Reliability02

Eco Filter Extends Replacement Cycle to 20,000 Hours

The Eco Filter incorporates an electrostatic Micro Cut Filter that collects minute dust particles using an ion effect. It joins with a dust-resistant cabinet to enable long-term use even in punishing conditions. A long maintenance cycle of up to 20,000 hours*1 reduces hassle, while the eco-friendly washable filter*2 can be reused.

*1 Usage environment may affect filter maintenance cycle.

*2 Please follow the procedures listed in the operating instructions when washing filter with water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing.

Optional Long Life Filter for 20,000-hour Service-free Operation

High Image Quality and Reliability

Lightweight Design Outputs High Brightness

With proprietary optical drive system optimized for the light source, efficient cooling systems, and lightweight yet tough cabinet materials, these projectors achieve high brightness in units that are smaller, lighter, and easier to handle.

Lightweight Design Outputs High Brightness

120 Hz Real Motion Processor Reduces Motion Blur

Real Motion Processor interpolates images for a 120 Hz* frame-rate. Smooth, stutter-free 120 Hz* reproduction is also possible using simultaneous inputs (two 3G-SDI inputs or DVI-D/HDMI combination). Together with a refined optical engine that enhances focus, Real Motion Processor delivers a better sense of resolution, contrast, and fluidity of motion.

120 Hz Real Motion Processor Reduces Motion Blur

* Refresh-rate varies depending on vertical scanning frequency.

Detail Clarity Processor 5

Proprietary circuitry analyzes individual video frames to identify and clarify areas of the image containing fine details and textures. Algorithms pull information from four frequency bandwidths, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise.

Detail Clarity Processor 5

Dynamic Contrast Function for High 20,000:1 Contrast

Direct laser power output modulation achieves high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1* contrast is delivered even when bright and dark scenes frequently interchange.

* Please refer to the specification page for detail condition.

System Daylight View 3

Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

System Daylight View 3

Long Life Modes for Continuous Operation

Select your preferred operational mode to balance control brightness decline with brightness output according to the specific requirements of individual applications.

Selectable Operational Modes

Installation Flexibility and Powerful Functionality

Free 360-degree Installation

SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.

Free 360-degree Installation

Single-Cable DIGITAL LINK Connection

Single-Cable 4K DIGITAL LINK Connection

DIGITAL LINK transmits uncompressed video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*2. Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.

*1 Audio transmission depending on model’s audio capability.

*2 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p.

Backup Input Setting Assures Picture Display

Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

Contrast Sync and Shutter Sync Function

* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.

Geometry Manager Pro Software and Upgrade Kits

Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC. The suite includes two upgrade kits that can be optionally unlocked with paid key codes. ET-UK20 adds uniformity correction and extensive creative masking capabilities. ET-CUK10 features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera. This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.

Masking Function (Custom Masking)

Note: Requires the latest firmware. Register your projector at PASS to update firmware, get free Geometry Manager Pro software for PC, obtain activation keys for ET-UK20 and ET-CUK10, and download a plug-in for ET-CUK10. Compatible cameras for ET-CUK10 comprise Panasonic AW-HE70/ AW-UE70 and Nikon D5200/D5300/D5500/D5600.
Visit PASS at https://panasonic.net/cns/projector/pass for more information.

3D Projection Capability

This Panasonic projector is compatible with active 3D projection technology. Click here to view information on 3D projection using a combination of external IR transmitter and active-shutter 3D glass. Please contact your sales representative for information on passive 3D projection.

Active 3D Projection Capability

Early Warning Software ET-SWA100 Series (Optional)

Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.

Early Warning Software ET-SWA100 Series (Optional)

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

Common Lenses for Panasonic 3-Chip DLP™ Projectors
商用廠牌

商用投影技術

介面

,

光源

流明

售價

解析度

投射比

ET-D75LE6鏡頭:0.9~1.1, ET-D75LE10鏡頭:1.3~1.7, ET-D75LE20鏡頭:1.7~2.4, ET-D75LE30鏡頭:2.4~4.7, ET-D75LE40鏡頭:4.6~7.4, ET-D75LE8鏡頭:7.3~13.8

產品規格

Power supply 100–240 V AC, 50/60 Hz
Power consumption*1 1,200 W (1,280 VA) (0.3 W with Standby Mode set to Eco*2, 4 W with Standby Mode set to Normal); Average power consumption: 800 W (Normal Mode), 680 W (Eco Mode), 620 W (Long Life 1 Mode), 590 W (Long Life 2 Mode), 550 W (Long Life 3 Mode)
DLP™ chip
Panel size 24.4 mm (0.96˝) diagonal (16:10 aspect ratio
Display method DLP™ chip x 3, DLP™ projection system
Pixels 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels
Refresh rate 120 Hz*3
Lens Optional powered zoom and fixed-focus lenses
Light source Laser diode (Class 1), Light source life*4: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode)
Screen size (diagonal) 1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with the ET-D75LE8, 3.05-15.24 m (120–600˝) with the ET-D75LE90, 16:10 aspect ratio
Brightness*5 12,000 lm
Contrast*5 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 1920 x 1200 pixels*6
Supported RGB signal XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift*7 (from center of screen)
Vertical ±55 % (±44 % with the ET-D75LE6, +73 – +78 % with the ET-D75LE90) (powered)
Horizontal ±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered)
Keystone correction range*9 Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)
Keystone correction range with optional Upgrade Kit ET-UK20*9 Vertical: ±45° (±40° with ET-D75LE10/ET-D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE50/ET-D75LE6, 0° with ET-D75LE90)
Installation Ceiling/floor, front /rear, free 360-degree installation
Cabinet materials Molded plastic
Dimensions (W x H x D) 578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included), 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts)
Weight*10 Approx. 44.0 kg (97 lbs) (optional lens not included)
Operation noise*5 43 dB
Operating environment Operating temperature: 0–50 °C (32–122 °F)*11, operating humidity: 10-–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)
TerminalsPT-RZ12K/ PT-RS11K
*1 Operating temperature: 25 °C (77 °F), altitude: 700 m (22 ft 12 in), ICE627087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3. *2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *3 Refresh rate varies depending on scanning frequency. *4 At this time the brightness will have decreased to approximately half of its original level. Operating Temperature: 35 °C (95 °F), Altitude 700 m (22 ft 12 in), Dust: 0.15 mg/m3. *5 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *6 Input signals that exceed the native resolution will be converted to the native resolution. *7 Optical axis shift function cannot be operated when used with the ET-D75LE50. *8 Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90. *9 Range varies depending on mounted lens. *10 Average value. May differ depending on the actual unit. *11 When operational mode is set to Normal, operating temperature is from 0 °C (32 °F) to 50 °C (122 °F), and operating temperature is from 0 °C (32 °F) to 45 °C, (113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F) to 45 °C (113 °F). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F) to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly.

電子型錄下載

電子型錄下載
來電詢價 preloader