Panasonic PT-RZ34K 雷射高階工程投影機

Projector type

3-Chip DLP™ projector

DLP™ chip

Panel size

24.4 mm (0.96 in) diagonal (16:10 aspect ratio)

Display method

DLP™ chip x 3, DLP™ projection system

Number of pixels

2,304,000 (1920 x 1200 pixels) x 3

Light source

Laser diodes (Blue LD, Red LD)

Light output

30,500 lm*1/32,000 lm (Center)*2

Time until light output declines to 50 %*3

20,000 hours (Normal), 24,000 hours (Eco), 26,000 hours (Quiet)

Resolution

WUXGA (1920 x 1200 pixels)

Contrast ratio*1

20,000:1 (Full On/Full Off, Dynamic Contrast [3])

Screen size (diagonal)

1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95, 5.08–15.24 m (200–600 in) with ET-D3LEU100/ET-D3LEW200

Center-to-corner zone ratio*1

90 %

Lens

Optional (no lens included with this model)

Lens shift*4 (From the origin point of the lens mounter)

Vertical

±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)

Horizontal

±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)

Keystone correction range

Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.

Installation

Ceiling/floor, front/rear, free 360-degree installation

Terminals

SDI IN

BNC x 1: 3G/HD-SDI input

HDMI IN

HDMI x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5)

DVI-D IN

DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)

MULTI PROJECTOR SYNC IN

—

MULTI PROJECTOR SYNC OUT

—

MULTI PROJECTOR SYNC IN terminal/3D SYNC 1 IN/OUT terminal(dual purpose)

BNC x 1

MULTI PROJECTOR SYNC OUT terminal/3D SYNC 2 OUT terminal (dual purpose)

BNC x 1

SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

SERIAL OUT

D-sub 9-pin (male) x 1 for link control (RS-232C compliant)

REMOTE 1 IN

M3 stereo mini-jack x 1 for wired remote control

REMOTE 1 OUT

M3 stereo mini-jack x 1 for link control

REMOTE 2 IN

D-sub 9-pin (female) x 1 for external control (parallel)

DIGITAL LINK

RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5

LAN

RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible

USB

USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series)/USB Memory Stick

DC OUT

USB Type A x 2 (for power supply, DC 5 V total of 2 A)

Expansion slot

SLOT (one terminal, vacant) for interface boards, SLOT NX compatible

Power supply

AC 200 V–240 V (Light output will decrease when using the projector with AC 100 V to AC 120 V)

Power consumption

2,450 W (Standby: 13 W)

Cabinet materials

Molded plastic

Operation noise*1

49 dB (Normal), 46 dB (Quiet)

Dimensions (W x H x D)

Approx. 598 x 353 x 780 mm (23 17/32˝ x 13 29/32˝ x 30 23/32˝) (not including protruding parts)

Weight

68.6 kg (151.2 lbs)

Operating environment

Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation)

Applicable software

Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™