電話 02-2394-2890 Line request-quote
  • Laser 1-chip DLP, 6,200 lm (center)/ 6,000 lm (ANSI), WUXGA
  • Quartet Colour Harmonizer technology for more accurate colour reproduction
  • Maintenance free up to 20.000 hours with dust-resistant optical block and long lasting laser engine
  • Supports 4K/60p Signal Input, separate DIGITAL LINK and LAN terminals
商用廠牌

商用投影技術

介面

,

光源

流明

售價

解析度

投射比

ET-DLE170鏡頭:1.46~2.05, ET-DLE060鏡頭:0.6~0.8, ET-DLE055鏡頭:0.8, ET-DLE085鏡頭:0.8~1, ET-DLE105鏡頭:1~1.32, ET-DLE150鏡頭:1.3~2, ET-DLE250鏡頭:2.4~3.7, ET-DLE350鏡頭:3.7~5.6, ET-DLE450鏡頭:5.5~8.9

機種

,

產品規格

Power supply 100–240 V AC, 10.4–5.0 A, 50/60 Hz
Power consumption*1
PT-RZ770/RW730 825 W (0.3 W with Standby Mode set to Eco, 3 W with Standby Mode set to Normal, 85 W with Quick Startup set to ON); 593 W (Normal Mode), 508 W (Eco Mode), 333–477 W (Long Life 1 Mode), 310–477 W (Long Life 2 Mode), 286–477 W (Long Life 3 Mode), 72 W (Shutter Mode)
DLP™ chip
Panel size 17.0 mm (0.67˝) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Pixels 2,304,000 (1920 x 1200) pixels
Lens Powered zoom (throw ratio 1.7–2.4:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
Light source Laser diodes (Class 1) (Class 3R for US models), light source life*2: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode). At this time, brightness will have decreased to approximately half its original level [Operating temperature: 30 °C (86 °F), altitude: 700 m (2,297 ft), dust density 0.15 mg/m3, Dynamic Contrast Mode: 3]
Screen size (diagonal) 1.27–15.24 m (50–600˝), 1.27–5.08 m (50–200˝) with ET-DLE055, 2.54–8.89 m (100–350˝) with ET-DLE030, 16:10 aspect ratio
Brightness PT-RZ770: 7,200 lm (Center)*3 / 7,000 lm*2 PT-RZ660: 6,200 lm (Center)*3 / 6,000 lm*2
Contrast*3 10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 1920 x 1200 pixels
Supported RGB signal XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift*4 (from center of screen)
Vertical +50 %, -16 % (powered)
Horizontal +30 %, -10 % (+28 %, -10 % with the ET-DLE085/DLE105) (powered)
Keystone correction range*5 Vertical: ±40 ° (±22 ° with ET-DLE085/DLE055, +5 ° with ET-DLE030), horizontal: ±15 ° (cannot be operated with ET-DLE030)
Keystone correction range with optional Upgrade Kit ET-UK20*5 Vertical: ±45° (±40° with the ET-DLE150/ET-DLE250/supplied lens [DLE170] ), ±22° with the ET-DLE085/ET-DLE055), horizontal: ±40° (±15° with ET-DLE085/ET-DLE055), Up to a total of ±55 ° during simultaneous horizontal and vertical correction.
Installation Ceiling/floor, front /rear, free 360-degree installation
Cabinet materials
Molded plastic Molded plastic
Dimensions (W x H x D)
with supplied lens 498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8˝*6 x 22 7/8˝) (with supplied lens [DLE170])
without lens 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝*6 x 21 3/16˝) (without lens)
Weight*7
with supplied lens PT-RZ770: Approx. 23.2 kg (51.1 lbs)
without lens PT-RZ770: Approx. 22.4 kg (49.4 lbs)
Operation noise*2 PT-RZ770: 36 dB
Operating environment Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro*9 (ET-UK20 Upgrade Kit*10 and ET-CUK10 Auto Screen Adjustment Kit*11)
TerminalsPT-RZ770/RZ660
*1 Operating temperature 25 °C (77 °F), altitude 700 m (2,297 ft), IEC62087: 2008 Broadcast Content, Picture Mode: Standard, Dynamic Contrast: 2. *2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. *3 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped. May differ depending on actual unit. *4 Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed. *5 Range varies depending on mounted lens. *6 With legs at shortest position. *7 Average value. May differ depending on the actual unit. *8 When used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level in Normal Mode, and from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level in other modes. If the ambient temperature exceeds 35 °C (95 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, the light output may be reduced to protect the projector. *9 Geometry Manager Pro software is available only with PT-RZ770/RZ660. *10 ET-UK20 Series is available only with PT-RZ770/RZ660. *11 ET-CUK10 Series is available only with PT-RZ770/RZ660.

電子型錄下載

電子型錄下載
來電詢價