電話 02-2394-2890 Line request-quote

-光度輸出: 27,000 流明 (中央部份);對比度 : 20000:1
-解像度 : 4K+ (5120×3200)(Quad Pixel Drive: ON)
-用Laser diode 光源,可長時間使用
-240Hz 畫面更新率(Refresh rate)
-光亮色彩控制技術,可同步平衡多部投影機之亮度色彩
-備用輸入功能,主輸入訊源故障時可自動切換至備用訊源
-載置全新DIGITAL LINK功能,兼容HDbaseT技術的數碼連接,可以單-電纜傳送數碼訊號 (最長100米)至投影機
-內置幾何調整功能,可投射畫面至弧型表面而不會失真,更可選配升級套件ET-UK20,提高幾何調整功能
-可選購數碼介面盒ET-YFB100G 或 ET-YFB200G
-可選配0.36:1投射比的超短距鏡頭ET-D75LE95

Give Your Business an Edge with 4K+ Projection

The PT-RQ32K gives resellers and staging professionals an opportunity to upgrade quality of service while reducing overheads and total cost of ownership. Panasonic’s 3-Chip DLP™ SOLID SHINE Laser 4K+ flagship maintains image consistency longer with huge output power and lower maintenance with fractional weight of competitive projectors. Deliver total immersion in temporary and permanent installations for single or multi-projection layouts. Reimagine your business in 4K+ by Panasonic.

4K PROFESSIONALDLPSOLID SHINE LASER4K DIGITAL LINKGeo. Pro24/7 Oparation360°

PT-RQ32KLenses sold separately.

PT-RQ32K
27,000 lm (Center) *1/26,000 lm*2 4K+ (5120 x 3200)*3
20,000:1 Geometric Adjustment

The SOLID SHINE Laser Advantage

Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

Diagram for 3-Chip DLP™ Laser Projector

Precision Color Reproduction

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Lower Total Cost of Ownership

Projector delivers up to 20,000 hours*1 maintenance-free service at full power with no filters to clean or replace*2 thanks to a fully sealed optical block and redesigned air intake. Energy consumption has also been reduced.

*1 At this time the brightness will have decreased to approximately half of its original level. Please refer specification for detail condition.
Filter Replacement Period:
Supplied Filter: 2,000 hours (High Mode), 4,000 hours (Normal Mode)
Long Life Filter: 4,000 hours (High Mode), 20,000 hours (Normal Mode)

*2 Usage environment may affect filter maintenance cycle.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dustproof Optics Extend Longevity

Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.

* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.

Efficient Cooling System Enhances Reliability

A liquid cooling system for the light source features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise*.

* Please refer to product specifications for more details.

Efficient Cooling System Enhances Reliability01
Efficient Cooling System Enhances Reliability02

Optional Long Life Filter for 20,000-hour Service-free Operation

Long Life Filter includes an electrostatic Micro Cut Filter to collect minute dust particles with an ion effect. Combined with a dust-resistant cabinet, this enables 20,000 hours* of projection with no maintenance.

* Please refer to the specification for detail condition.

Optional Long Life Filter for 20,000-hour Service-free Operation

Image Quality and Reliability

Quad Pixel Drive Goes Beyond 4K

Better-than-4K resolution is achieved by employing a high-speed 2560 x 1600-pixel (WQXGA) DMD chip that shifts each pixel vertically and horizontally, quadrupling the pixel-count. Working in concert with Real Motion Processor 240 Hz frame-creation, Quad Pixel Drive technology produces film-like 5120 x 3200-pixel (4K+/16:10) images. As well as silk-smooth video, this powerful processing engine renders text in the finest detail for lectures and presentations.

Pixel Quadrupling Technology

Shifting pixels vertically and horizontally creates ultra-high-resolution pictures that exceed standard Ultra HD resolution.

Pixel Quadrupling Technology

Real Motion Processor

High-speed 240 Hz frame creation supports images up to 5120 x 3200 pixels (16:10) resolution.

Real Motion Processor

* Resolution 5120 x 3200 pixels (maximum physical resolution).

240 Hz Real Motion Processor Reduces Motion Blur

Real Motion Processor uses sophisticated algorithms to create three additional frames for each image, boosting native 60 fps footage to 240 frames per second*1. The result is smooth and realistic motion rendering, particularly useful for broadcasting sporting events and other fast-paced video. Further, images can be displayed with SDI, DVI-D, and HDMI simultaneous inputs*2. A refined optical engine enhances focus performance for a lifelike sense of resolution, contrast, and fluidity.

240 Hz Real Motion Processor Reduces Motion Blur

*1 Refresh rate varies depending on vertical scanning frequency. Note that 240 Hz frame rate is downsampled to 60 Hz when projecting at 4K+ resolution.

*2 Geometric Adjustment and Upgrade Kit functions are not supported with simultaneous video signal input.

Detail Clarity Processor 5+

Panasonic’s next-generation circuit technology analyzes individual images frame by frame to clarify areas containing fine details and textures. Algorithms extract hidden information from super-high to low-frequency video bands, sharpening outlines, correcting contours, and reducing ringing noise to improve the sense of resolution. The technology includes an exclusive Refine Enhancer algorithm to further optimize detail reproduction in 4K+ images.

Detail Clarity Processor 5+

Dynamic Contrast Function for High 20,000:1 Contrast

Direct laser power output modulation achieves high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1* contrast is delivered even when bright and dark scenes frequently interchange.

* Please refer to the specification page for detail condition.

System Daylight View 3

Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

System Daylight View 3

Supports BT.2020 and HDR for Latest 4K Standard

An emulation mode for BT.2020, a 4K color-space standard, reproduces a wider color gamut than conventional Rec.709 standard. Additionally, the projectors support HDR (High Dynamic Range). Ultra-high-resolution image reproduction is truly stunning, from deepest black to sparkling bright highlights.

90 % Brightness Uniformity

SOLID SHINE Laser delivers superior screen brightness uniformity thanks to highly accurate white balance control. Brightness uniformity is greater than 90 % when measured at the corners, edges, and center of the screen.

Installation Flexibility and Powerful Functionality

Free 360-degree Installation

SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.

Free 360-degree Installation

Contrast Sync and Shutter Sync Function

Contrast Sync function, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.

Contrast Sync and Shutter Sync Function

* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate individually if desired.

Single-Cable 4K DIGITAL LINK Connection

Based on HDBaseT™ technology, DIGITAL LINK supports transmission of video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of 150 m (492 ft) for Full HD video and 50 m (164 ft) for 4K*2 video. An optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation in large venues while reducing cost and improving reliability.

*1 Audio transmission depending on model’s audio capability.

*2 ET-YFB200G/YFB100G is not compatible with 4K signals. 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p in Long Reach Mode.

Single-Cable 4K DIGITAL LINK Connection

Backup Input Setting Assures Picture Display

Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

Contrast Sync and Shutter Sync Function

* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.

Geometry Manager Pro Software and Upgrade Kits

Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC. The suite includes two upgrade kits that can be optionally unlocked with paid key codes. ET-UK20 adds uniformity correction and extensive creative masking capabilities. ET-CUK10 features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera. This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.

Masking Function (Custom Masking)

Note: Requires the latest firmware. Register your projector at PASS to update firmware, get free Geometry Manager Pro software for PC, obtain activation keys for ET-UK20 and ET-CUK10, and download a plug-in for ET-CUK10. Compatible cameras for ET-CUK10 comprise Panasonic AW-HE70/ AW-UE70 and Nikon D5200/D5300/D5500/D5600.
Visit PASS at https://panasonic.net/cns/projector/pass for more information.

Early Warning Software ET-SWA100 Series (Optional)

Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.

Early Warning Software ET-SWA100 Series (Optional)

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Eyebolt-ready for Crane Installations

Eyebolts allow the projector to hang from a crane, simplifying rigging at large event venues for rental/staging professionals.

Eyebolt-ready for Crane Installations
商用廠牌

商用投影技術

介面

,

光源

流明

售價

解析度

投射比

ET-D75LE6鏡頭:0.9~1.1, ET-D75LE10鏡頭:1.3~1.7, ET-D75LE20鏡頭:1.7~2.4, ET-D75LE30鏡頭:2.4~4.7, ET-D75LE40鏡頭:4.6~7.4, ET-D75LE8鏡頭:7.3~13.8

機種

,

產品規格

Power supply AC 100–120 V (12 A) / AC 200–240 V (16 A), 50/60 Hz (Brightness restricted with voltage lower than 200 V)
Power consumption*1 2,950 W (0.3 W with Standby Mode set to Eco*2, 4 W with Standby Mode set to Normal) [2,950 VA, AC 200 V]; Average Power Consumption: 2,400 W (High Mode), 2,000 W (Normal Mode) [Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), IEC62087: 2008 Broadcast content, Image Mode: Standard, Dynamic Contrast Mode: 2]
DLP™ chip
Panel size 22.9 mm (0.9˝) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON, 4,096,000 (2560 x 1600) x 3, total of 12,288,000 pixels when Quad Pixel Drive set to OFF
Refresh rate 240 Hz*3
Lens Optional (no lens included with this model)
Light source Laser diodes (Class 1), Light-source life: 8,000 hours (High Mode, brightness decreases to approx. 70 %), 18,000 hours (High Mode, brightness decreases to approx. 50 %), 20,000 hours (Normal Mode, brightness decreases to approx. 50 %), 43,800 hours (Long Life 1 Mode, consistent brightness), 61,320 hours (Long Life 2 Mode, consistent brightness), 87,600 hours (Long Life 3 Mode, consistent brightness) [IEC62087: 2008 Broadcast content, Dynamic Contrast Mode: 3]
Filter With supplied filter: 4,000 hours (Normal Mode), 2,000 hours (High Mode), 20,000 hours (Long Life 1/2/3 Mode); With Long Life Filter: 20,000 hours (Normal Mode), 4,000 hours (High Mode), 40,000 hours (Long Life 1/2/3 Mode)
Screen size (diagonal) 1.78–25.4 m (70–1,000˝) with 16:10 aspect ratio; 1.78–15.24 m (70–600˝) with the ET-D75LE8, 16:10 aspect ratio; 3.05–15.24 m (120–600˝) with the ET-D75LE95, 16:10 aspect ratio
Brightness*4 27,000 lm (Center)*5 / 26,000 lm*6 [High Mode], 22,500 lm (Center)*5 / 21,600 lm*6 [Normal Mode], 12,000 lm [Long Life 1 Mode], 10,000 lm [Long Life 2 Mode], 8,000 lm [Long Life 3 Mode]
Contrast*6 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 4K+ (5120 x 3200) (Quad Pixel Drive: ON)
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i, 4K
Optical axis shift*7 (from center of screen)
Vertical ±59 % (±56 % with the ET-D75LE6, +69 – +84 % with the ET-D75LE95) (powered)
Horizontal ±29 % (±19 % with the ET-D75LE6, ±21 % with the ET-D75LE95) (powered)
Keystone correction range*8 Vertical: ±40 ° (± 22 ° with ET-D75LE50, ±28 ° with ET-D75LE6, 0 ° to +5 ° with ET-D75LE95), Horizontal: ±15 °(0 ° with ET-D75LE95)
Keystone correction range with optional Upgrade Kit*8 Vertical: ±45 ° (± 40 ° with ET-D75LE10/D75LE20, ±22 ° with ET-D75LE50, ±28 ° with ET-D75LE6, 0 ° to +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D75LE50/D75LE6/D75LE10, ±20 ° with ET-D75LE20, ±25 ° with ET-D75LE30, ±30 ° with ET-D75LE40, 0 ° with ET-D75LE95), Up to a total of ±30 ° during simultaneous horizontal and vertical correction.
Installation Horizontal/vertical, free 360-degree installation
Cabinet materials Metal (Partly Plastic Mold)
Dimensions (W x H x D) 700 x 418*9 x 1,250 mm (27 9/16˝ x 16 15/32˝*9 x 49 7/32˝) (including protruding parts); 700 x 373*10 x 1,070 mm (27 9/16˝ x 14 11/16˝*10 x 42 1/8˝) (not including protruding parts)
Weight*11 Approx. 83 kg (183.0 lbs)
Operation noise*6 49 dB
Operating environment Operating temperature: 0–45 °C (32–113 °F) [altitude: up to 1,400 m (4,593 ft), High/Normal Mode]; 0–40 °C (32–104 °F)*12 [altitude: up to 4,200 m (13,780 ft), High/Normal Mode]; 0–40 °C (32–104 °F)*12 [altitude: up to 2,700 m (8,858 ft), Long Life1/2/3 Mode]; 0–40 °C (32–104 °F) [altitude: up to 1,400 m (4,593 ft) with Smoke Cut Filter]; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)
TerminalsPT-RQ32K
*1 Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), IEC62087: 2008 Broadcast Content, Image Mode: Standard, Dynamic Contrast Mode: 2. *2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *3 Refresh-rate varies depending on vertical scanning frequency. *4 With lens other than ET-D75LE95 and power supply of AC 200 V *5 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *7 Optical axis shift function cannot be operated when used with the ET-D75LE50. *8 Range varies depending on mounted lens. *9 With legs at shortest position. *10 Excluding legs. *11 Average value. May differ depending on the actual unit. *12 If ambient temperature exceeds 35 °C (95 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, light output may be reduced to protect the projector.

電子型錄下載

電子型錄下載
來電洽詢優惠價