電話 02-2394-2890 Line request-quote

光度輸出: 31,000 流明 (中央部份);對比度 : 20000:1
-解像度: 1920 x 1200 點 ( WUXGA)
-採用Laser diode 光源,可長時間使用
-120Hz 畫面更新率(Refresh rate)
-光亮色彩控制技術,可同步平衡多部投影機之亮度色彩
-備用輸入功能,主輸入訊源故障時可自動切換至備用訊源
-載置全新DIGITAL LINK功能,兼容HDbaseT技術的數碼連接,可以單-電纜傳送數碼訊號 (最長100米)至投影機
-內置幾何調整功能,可投射畫面至弧型表面而不會失真,更可選配升級套件ET-UK20,提高幾何調整功能
-可選購數碼介面盒ET-YFB100G 或 ET-YFB200G

Pinnacle Laser Brightness

The evolution of 3-Chip DLP™ SOLID SHINE Laser culminates in the PT-RZ31K Series, a flagship forged by end-user experience with 31,000-lumen (Center/High Mode)*1 of brightness for rental/staging events. Convenient on-site rigging and dust-resistant optics push service-free projection beyond 20,000 hours*2 in Normal Mode for permanent installations. In every detail, these flagships make elite performance last longer.

DLPSOLID SHINE LASERDEGITAL LINKGeo. Pro24/7 Oparation360°

PT-RZ31KLenses sold separately.

PT-RZ31K
31,000 lm (Center)*1 / 30,000 lm*3 WUXGA (1920 x 1200)
20,000:1 Geometric Adjustment

PT-RS30KLenses sold separately.

PT-RZ31K
31,000 lm (Center)*1 / 30,000 lm*3 SXGA+ (1400 x 1050)
20,000:1 Geometric Adjustment

*1 Luminance measured at center of screen in High Mode. Operation in High Mode may reduce maintenance timing in comparison to use in Normal Mode.

*2 At this time the brightness will have decreased to approximately 50 % of its original level (Normal Mode, Dynamic Contrast Mode: 3, Image Mode: Dynamic, IEC62087: 2008 Broadcast Content, dust density of 0.15 mg/m3). Optional Long Life Filter is required for continuous 20,000 hours operation. In High Mode, no maintenance required for 4,000 hours.

*3 Luminance measured in High Mode. Operation in High Mode may reduce maintenance timing in comparison to use in Normal Mode.

SOLID SHINE Laser Technology

COLLAPSE ALL

Bright and Vivid Picture Quality from 3-Chip DLP™ SOLID SHINE Laser

Combining 3-Chip DLP™ imaging with original SOLID SHINE Laser Phosphor technology, Panasonic 3-Chip DLP™ SOLID SHINE Laser Series produces vividly colored pictures rich in detail with excellent brightness. Solid-state laser light sources and specially engineered heat-resistant phosphor wheels work together with three discrete DLP™ modules (R/G/B) for high brightness, true color accuracy, and high contrast in large venues.

Diagram for 3-Chip DLP™ Laser Projector

Precision Color Reproduction

3-Chip DLP™ SOLID SHINE Laser projectors capture a more accurate color space than comparable laser projectors. Blue lasers ensure greater precision while an expanded color gamut improves white-balance accuracy.

Lower Total Cost of Ownership

Projector delivers up to 20,000 hours*1 maintenance-free service at full power with no filters to clean or replace*2 thanks to a fully sealed optical block and redesigned air intake. Energy consumption has also been reduced.

*1 At this time the brightness will have decreased to approximately half of its original level. Please refer specification for detail condition.
Filter Replacement Period:
Supplied Filter: 2,000 hours (High Mode), 4,000 hours (Normal Mode)
Long Life Filter: 4,000 hours (High Mode), 20,000 hours (Normal Mode)

*2 Usage environment may affect filter maintenance cycle.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.

Dual-Laser Optical Engine Assures Failsafe Reliability

Dustproof Optics Extend Longevity

Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.

* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.

Efficient Cooling System Enhances Reliability

A liquid cooling system for the light source features a new air intake and solid aluminum radiator to suppress temperature rises, allowing stable operation in high temperatures while reducing noise*.

* Please refer to product specifications for more details.

Efficient Cooling System Enhances Reliability01
Efficient Cooling System Enhances Reliability02

Optional Long Life Filter for 20,000-hour Service-free Operation

Long Life Filter includes an electrostatic Micro Cut Filter to collect minute dust particles with an ion effect. Combined with a dust-resistant cabinet, this enables 20,000 hours* of projection with no maintenance.

* Please refer to the specification for detail condition.

Optional Long Life Filter for 20,000-hour Service-free Operation

Image Quality and Reliability

COLLAPSE ALL

120 Hz Real Motion Processor Reduces Motion Blur

Real Motion Processor interpolates images for a 120 Hz* frame-rate. Smooth, stutter-free 120 Hz* reproduction is also possible using simultaneous inputs (two 3G-SDI inputs or DVI-D/HDMI combination). Together with a refined optical engine that enhances focus, Real Motion Processor delivers a better sense of resolution, contrast, and fluidity of motion.

120 Hz Real Motion Processor Reduces Motion Blur

* Refresh-rate varies depending on vertical scanning frequency.

Detail Clarity Processor 5

Proprietary circuitry analyzes individual video frames to identify and clarify areas of the image containing fine details and textures. Algorithms pull information from four frequency bandwidths, from super-high to low, to sharpen outlines, correct contours, and reduce ringing noise.

Detail Clarity Processor 5

Dynamic Contrast Function for High 20,000:1 Contrast

Direct laser power output modulation achieves high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise output adjustment, while accurate 20,000:1* contrast is delivered even when bright and dark scenes frequently interchange.

* Please refer to the specification page for detail condition.

System Daylight View 3

Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.

System Daylight View 3

90 % Brightness Uniformity

SOLID SHINE Laser delivers superior screen brightness uniformity thanks to highly accurate white balance control. Brightness uniformity is greater than 90 % when measured at the corners, edges, and center of the screen.

Installation Flexibility and Powerful Functionality

COLLAPSE ALL

Free 360-degree Installation

SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.

Free 360-degree Installation

Contrast Sync and Shutter Sync Function

Contrast Sync function, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.

Contrast Sync and Shutter Sync Function

* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate individually if desired.

Single-Cable DIGITAL LINK Connection

Single-Cable 4K DIGITAL LINK Connection

DIGITAL LINK transmits uncompressed video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*2. Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.

*1 Audio transmission depending on model’s audio capability.

*2 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p.

Backup Input Setting Assures Picture Display

Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.

Contrast Sync and Shutter Sync Function

* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.

Geometry Manager Pro Software and Upgrade Kits

Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC. The suite includes two upgrade kits that can be optionally unlocked with paid key codes. ET-UK20 adds uniformity correction and extensive creative masking capabilities. ET-CUK10 features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera. This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.

Masking Function (Custom Masking)

Note: Requires the latest firmware. Register your projector at PASS to update firmware, get free Geometry Manager Pro software for PC, obtain activation keys for ET-UK20 and ET-CUK10, and download a plug-in for ET-CUK10. Compatible cameras for ET-CUK10 comprise Panasonic AW-HE70/ AW-UE70 and Nikon D5200/D5300/D5500/D5600.
Visit PASS at https://panasonic.net/cns/projector/pass for more information.

3D Projection Capability

This Panasonic projector is compatible with active 3D projection technology. Click here to view information on 3D projection using a combination of external IR transmitter and active-shutter 3D glass. Please contact your sales representative for information on passive 3D projection.

Active 3D Projection Capability

Early Warning Software ET-SWA100 Series (Optional)

Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.

Early Warning Software ET-SWA100 Series (Optional)

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Panasonic 3-Chip DLP™ projectors share a range of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.

Common Lenses for Panasonic 3-Chip DLP™ Projectors

Eyebolt-ready for Crane Installations

Eyebolts allow the projector to hang from a crane, simplifying rigging at large event venues for rental/staging professionals.

Eyebolt-ready for Crane Installations
商用廠牌

商用投影技術

介面

,

光源

流明

售價

解析度

投射比

ET-D75LE6鏡頭:0.9~1.1, ET-D75LE10鏡頭:1.3~1.7, ET-D75LE20鏡頭:1.7~2.4, ET-D75LE30鏡頭:2.4~4.7, ET-D75LE40鏡頭:4.6~7.4, ET-D75LE8鏡頭:7.3~13.8

機種

,

產品規格

Power supply AC 200–240 V, 50/60 Hz; AC 100–200 V, 50/60 Hz (Brightness is restricted with lower voltage)
Power consumption*1 2,870 W (0.3 W with Standby Mode set to Eco*2, 4 W with Standby Mode set to Normal) [2,870 VA, AC 200 V]; Average power consumption: 2,310 W (High Mode), 1,890 W (Normal Mode)
DLP™ chip
Panel size 24.4 mm (0.96˝) diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 6,912,000 (1920 x 1200 x 3) pixels
Refresh rate 120 Hz*3
Lens Optional (no lens included with this model)
Light source Laser diode (Class 1), Light-source life: 18,000 hours (High Mode, brightness decreases to approx. 50 %)*4, 20,000 hours (Normal Mode, brightness decreases to approx. 50 %), 43,800 hours (Long Life 1 Mode, consistent brightness), 61,320 hours (Long Life 2 Mode, consistent brightness), 87,600 hours (Long Life 3 Mode, consistent brightness) [IEC627087: 2008 Broadcast content, Image mode: Standard, Dynamic Contrast Mode: 3]
Filter With supplied filter: 4,000 hours (Normal Mode), 2,000 hours (High Mode), 20,000 hours (Long Life 1/2/3 Mode); With Long Life Filter: 20,000 hours (Normal Mode), 4,000 hours (High Mode), 40,000 hours (Long Life 1/2/3 Mode)
Screen size (diagonal) 1.78–25.4 m (70–1,000˝) with 16:10 aspect ratio; 1.78–15.24 m (70–600˝) with the ET-D75LE8, 16:10 aspect ratio; 3.05–15.24 m (120–600˝) with the ET-D75LE95, 16:10 aspect ratio
Brightness 31,000 lm (Center)*5*7 /30,000 lm*5*6 (High Mode), 26,000 lm (Center)*5*7 /25,000 lm*5*6 (Normal Mode), 12,000 lm (Long Life 1 Mode), 10,000 lm (Long Life 2 Mode), 8,000 lm (Long Life 3 Mode)
Contrast*6 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 1920 x 1200 pixels
Supported RGB signal XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift*8 (from center of screen)
Vertical ±55% (±44% with the ET-D75LE6, +68 – +78% with the ET-D75LE95) (powered)
Horizontal ±20% (±15% with the ET-D75LE6, ±12% with the ET-D75LE95) (powered)
Keystone correction range*9 Vertical: ±40 ° (± 22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±15 °
Keystone correction range with optional Upgrade Kit ET-UK20*9 Vertical: ±45 ° (± 40 ° with ET-D75LE10/20, ±22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±40 ° (±15 ° with ET-D75LE50/6), Up to a total of ±55 ° during simultaneous horizontal and vertical correction.
Installation Ceiling/floor, front /rear, free 360-degree installation
Cabinet materials Metal, molded plastic
Dimensions (W x H x D) 700 x 418*10 x 1,250 mm (27 25/32˝ x 16 15/32˝*10 x 49 7/32˝ ) (including protruding parts); 700 x 373*11 x 1,070 mm (27 9/16˝ x 14 11/16˝*11 x 42 1/8˝ ) (not including protruding parts)
Shipping dimensions (W x H x D) PT-RZ31K/KUY: 914 x 625 x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝); PT-RZ31KE: 914 x 625 x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝)
Weight*12 Approx. 79 kg (174 lbs.)
Shipping weight PT-RZ31K/KUY: 100.7 kg (222.0 lbs.); PT-RZ31KE: 97.5 kg (214.9 lbs.)
Operation noise*5 49 dB
Operating environment Operating temperature: 0–50 °C (32–122 °F)*13 [altitude: up to 1,400 m (4,593 ft), High/Normal Mode]; 0–45 °C (32–113 °F)*13 [altitude: up to 4,200 m (13,780 ft), High/Normal/Standby/Eco/Long Life1/2/3 Mode]; 0–40 °C (32–104 °F) [altitude: up to 1,400 m (4,593 ft) with Smoke Cut Filter]; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)
TerminalsPT-RZ31K/ RS30K
*1 Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), IEC627087: 2008 Broadcast Content, Image Mode: Standard, Dynamic Contrast Mode: 2. *2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *3 Refresh-rate varies depending on vertical scanning frequency. *4 Brightness will have decreased to approximately 70 % of its original level after 8,000 hours operation. *5 With lens other than ET-D75LE95 and power supply of AC 200 V. *6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *7 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *8 Optical axis shift function cannot be operated when used with the ET-D75LE50. *9 Range varies depending on mounted lens. *10 With legs at shortest position. *11 Excluding legs. *12 Average value. May differ depending on the actual unit. *13 If ambient temperature exceeds 35 °C (95 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, light output may be reduced to protect the projector.

電子型錄下載

電子型錄下載
來電洽詢優惠價