The PT-RZ790 Series delivers the brightness, resolution, and color that designers need to enhance exhibits with bright, bold, and vivid pictures. SOLID SHINE Laser and Quartet Color Harmonizer enhance color-depth and white-balance accuracy for arrestingly realistic pictures even in well-lit spaces.
Projectors support our 1-Chip DLP™ lenses and 4K signal input*3 via HDMI® and DIGITAL LINK, adapting to your space with 23.2 kg*4 body and 36 dB operation in Normal Mode. Smart Projector Control app enhances efficiency with On/Off function, lens adjustment, touchscreen OSD navigation, and projection auto-focusing using your smartphone camera*5.
Hermetically sealed DMD block, shielded laser drive, and new filterless cooling system eliminate the hassle of maintenance for 20,000 hours*6 of continuous projection, while brightness ramp and color uniformity remain linear. For extra insurance, Backup Input*7 switches to a failback if primary video is interrupted.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.
*3 4K signals are converted to the projector’s resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.
*4 Including standard lens.
*5 Projector auto-focus may not be supported on some mobile devices.
*6 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, NORMAL Mode, Dynamic Contrast [ON], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until brightness decreases to 50 % will vary depending on environment and usage conditions. Parts other than the light source may require replacement before 20,000 hours, and checkup is recommended around this time.
*7 Combination of primary/backup input terminals is fixed. Backup Input function enabled when input signal to primary/backup terminals is the same.
ET-DLE030鏡頭:0.38, ET-DLE035鏡頭:0.38, ET-DLE055鏡頭:0.785, ET-DLE020鏡頭:0.28~0.299, ET-DLE060鏡頭:0.6~0.801, ET-DLE085鏡頭:0.782~0.977, ET-DLE105鏡頭:0.978~1.32, ET-DLE170鏡頭:1.71~2.41, ET-DLE250鏡頭:2.27~3.62, ET-DLE350鏡頭:3.58~5.45, ET-DLE450鏡頭:5.36~8.58
|Model||With supplied lens||PT-RZ790|
|Projector type||1-Chip DLP™ projector|
|DLP™ chip||Panel size||17.0 mm (0.67 in) diagonal (16:10 aspect ratio)|
|Display method||DLP™ chip x 1, DLP™ projection system|
|Number of pixels||2,304,000 (1920 x 1200 pixels)|
|Light source||Laser diodes|
|Light output||7,000 lm*1 /7,200 lm (Center)*2|
|Time until light output declines to 50 %*3||20,000 hours (NORMAL)/24,000 hours (ECO)|
|Resolution||1920 x 1200 pixels|
|Contrast ratio*1||10,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON)|
|Screen size [diagonal]||1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio|
|Center-to-corner zone ratio*1||90 %|
|Lens||PT-RZ790: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm PT-RZ790L: Optional powered zoom/focus lenses|
|Lens shift*4(From the origin point of the lens mounter)||Vertical||+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)|
|Horizontal||+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)|
|Keystone correction range||Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)|
|Keystone correction range with optional ET-UK20 Upgrade Kit||Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.|
|Installation||Ceiling/floor, front/rear, free 360-degree installation|
|Terminals||SDI IN||BNC x 1: 3G/HD/SD-SDI input|
|HDMI® IN||HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input*5 )|
|DVI-D IN||DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)|
|RGB 1 IN||RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR/YC/VIDEO|
|RGB 2 IN||D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR|
|SERIAL/MULTI PROJECTOR SYNC IN||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|SERIAL/MULTI PROJECTOR SYNC OUT||D-sub 9-pin (male) x 1 for link control|
|REMOTE 1 IN||M3 x 1 for wired remote control|
|REMOTE 1 OUT||M3 x 1 for link control (for wired remote control)|
|REMOTE 2 IN||D-sub 9-pin (female) x 1 for external control (parallel)|
|DIGITAL LINK||RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K signal input*5|
|LAN||RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible|
|Power supply||AC 100–240 V, 50/60 Hz|
|Cabinet materials||Molded plastic|
|Operation noise*1||36 dB|
|Dimensions (W x H x D)||PT-RZ790: 498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8 ˝*6 x 22 7/8˝ ) (with supplied lens) PT-RZ790L: 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8 ˝*6 x 21 3/16˝ ) (without lens)|
|Weight*7||PT-RZ790: Approx. 23.2 kg (51.1 lbs) (with supplied lens) PT-RZ790L: Approx. 22.4 kg (49.4 lbs) (without lens)|
|Applicable software||Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™|